Tools from General Siding Supply
 

 

Tapco Tools

The Hardest-Working Tools in the Business.

Reliability and speed are your best friends on the jobsite. That’s why, for quick and precise metal bending and slitting, look to Tapco Tools. We’ve been building the best tools in the industry for over 50 years. Our comprehensive range of brakes suits every application and material—from vinyl and aluminum, to copper and kynar-coated steel. Brake Buddy and Cut-Off hand tools make roll-forming and cutting simple, and our complete selection of sawing, coiling and slitting solutions delivers maximum versatility
.

The PRO 19
The PRO 19 delivers added value with more efficient bending and storage to reduce time-consuming handling and flipping of material. It efficiently creates soffit, fascia, custom brick mold, gutter aprons, chimney flashing, drip edges, window casing and sill trim, and easily produces flashing for any roof application. The locking system is efficient, using a pulling motion rather than a pushing motion, allowing you to be closer to the tool when working with large coil. The brakes’ individual bending handles allow you to get closer to the work compared to loop-design handles that can inhibit proximity. Tapco’s patented Moving Pivot Hinge allows increased bending power without marring materials, while dual locking handles provide fast, secure clamping.

Available Lengths: 8'6", 10'6" and 12'6"

Specifications & Capacities: PRO 19 Brake: 10'6"- 121 lbs; 12'6" - 147 lbs.

Throat Depth: 19"

Mouth opening: 2-3/8"

Bending Capacities: All Vinyl, Soft Aluminum up to .030, Galvanized Steel up to 28 ga., Copper Sheet & Coil up to 16 oz.
The PRO 14
The PRO 14 combines a 14" throat depth with a wide 2-3/8" mouth opening and patented inside working pockets. From soffit and fascia to custom brick mold, sill trim, window casing, chimney flashing and more, the PRO 14 easily produces custom pieces for any siding and roofing application. Its efficient, secure locking system uses a pulling motion rather than a pushing motion, allowing you to be closer to the tool when working with larger pieces. Individual bending handles also enhance easy operation, letting you get closer to the work. Our patented Moving Pivot Hinge allows increased bending power, and our unique hemming capability allows for 180-degree overbends to produce more rigid panels.

Available Lengths: 8'6", 10'6", 10'6" Heavy Duty and 12'6"

Specifications & Capacities: PRO 14 Brake 8'6" - 87 lbs; PRO14 Brake 10'6"- 106 lbs; PRO14 Heavy Duty 10'6" – 127 lbs; PRO14 Brake 12’6" - 129 lbs.

Throat Depth: 14"

Mouth opening: 2-3/8"

Bending Capacities: All Vinyl, Soft Aluminum up to .030, Galvanized Steel up to 28 ga., Copper

ProTrax™

Tapco’s ProTrax™ multi-angle saw table sets up fast, offering maximum versatility for siding professionals. Construction includes captured saw track for safe, secure operation and free-floating saw boom for flexibility and time savings at the job site. Cuts multiple angles from 3/12 to 12/12. Accommodates most 7-1/4" circular saws. Sub-structure provides self cleaning surface. Lightweight, durable tubular frame system. Available Snap Stand and Wheel Kit provide portability and stability. Available Deck Extender Kit expands deck up to 20" in width to accommodate siding, soffit and decorative siding profiles; converts to universal work station for layout and cutting of materials.

Deck Width: 13”

Length: 6’ Weight: 82 lbs.
Brake Buddy
The Brake Buddy is a revolutionary tool that can add value to every siding job by delivering enhanced style and individuality to your trim pieces. The Brake Buddy allows you to produce brick mold trim and decorative ribs in seconds. The measurement guide and quick-twist handle deliver quick adjustments and simple, efficient operation. For use with any Tapco portable brake. Includes molded plastic storage case.

Capacities: .019 aluminum, PVC-coated aluminum, vinyl-coated trim coil

Weight: 13 lbs.

Standard Rollers – Included in Brake Buddy Fascia Kit:

Rib Rollers

Graduated Brick Mold Rollers

Optional Rollers –Sold Separately:

Traditional Brick Mold Roller Kit

V-Groove Roller Kit

Crown Mold Roller Kit
PRO Cut-Off
The PRO Cut-Off lets you quickly and safely make factory-quality cuts right on your brake. Its single-pass cutting precision eliminates the use of dangerous utility knives and open blades, and the costly knifing damage they can cause to bending hinges. The ergonomic grip allows smooth, sure-handed operation. Includes molded plastic storage case, along with two PRO Cut-Off Gauges to simplify cutting with easy distance identification. Lightweight aluminum construction is built to last. For use with all PRO Series Brakes (1995 and after).

Capacities: Aluminum up to .030, Galvanized Steel up to 28 ga., Copper up to 16 oz., All Vinyl.
Snap Stand®
Snap Stand® completes your portable brake and saw table systems with sturdy, solid support that sets up in seconds. Legs adjust independently to level on uneven ground and fold flat for easy storage. Brakes and Saw Tables easily snap and lock into place. Adjustable heights from 29” to 34”. For use with all Tapco PRO Series Brakes, and MAX Trax and PRO Trax Saw Tables. Optional wheel Kit available for optimum portability.

Weight: 37 lbs.

Optional Wheel Kit for Snap Stand, 2 / kit: Easy attachment; tough 10” pneumatic tires on steel hubs; 10 lbs.
Snap Stand Wheel Kit
Snap Stand Wheel Kit - Optional Wheel Kit for Snap Stand, 2 / kit: Easy attachment; tough 10” pneumatic tires on steel hubs; 10 lbs.

Malco Products


Just the right tools for crimping, bending, folding or seaming metal. Today, Malco continues the tradition of quality and innovation, and distributes thousands of products from its Annandale, MN headquarters to trade professionals in the U.S. and around the globe.

A proud heritage for a promising future.

Andy Combination Aluminum Handled with grip Snip - MC12NG

Andy Aluminum Replacement Blades - MC12NRB

Trim Nail Punch with Retaining Clip - TNP2R

Snap Lock Punch - SL5

NHP1R Nail Hole Punch

SL2R Adjustable Snap Lock Punch

C4R Downspout Crimper

The SideSwiper - SRT2 Siding Removal Tool

Midwest Snips
THE WORLD'S BEST SNIPS.
Midwest Tool and Cutlery manufactures the highest quality snips hand tools on the market today.
The blade life and cutting performance of Midwest Snips® aviation and tinner snip models is lab and field test proven to exceed that of all other snips manufacturers. Midwest Snips blades are stronger, more durable, and outlast all others in cutting edge life because they are formed from a hot drop-forging process and not stamped or cast. Cutting performance is superior because Midwest Snips blades require the least amount of user hand pressure to complete a cut and blades stay in adjustment longer than those of any other snip manufacturer.


MW-P6716RLS
Aviation Snips - Regular Models - Forged Blade Standard Hardness Sets
MWT-TND
Trim Nail Driver
1-1/4"(35.7mm) throat for standard trim nails.
MWT-127SV
12" Vinyl Siding Snip
Forged blades have special hollow ground bevel edge for cutting vinyl siding and other soft materials. Cuts through nail lip without crushing. For cutting non-metals only.
FEATURES:
Nominal Length: 12"
Cut Length: 3"
Non-Metals
Titan Industries

 

Titan is a leading manufacturer of scaffolding, roofing equipment, drywall equipment and specialty ladders. Titan also has planking and staging equipment. Call today to find a local distributor to help determine what is right for your jobs.


2-Man 500 lbs. Capacity Stage 12" Wide

2 Man Stage


  • 500 lbs. Capacity                
  • 12" Wide
Available lengths:
  • 12" x 24'
  • 12" x 20'
  • 12" x 16'


Adjustable Standoff

Adjusts 13" to 25" from wall.  Fits extension ladders.


General Siding Supply carries full lines of siding, gutters, windows, doors and more. We believe in giving you more—more service, more products and more solutions!

Contact us here or call 402- 344-3300 today.

OMAHA, NE
1709 Mason Street
Omaha, NE 68108
402-344-3300
800-233-8017
Fax: 402-341-2267

LINCOLN, NE
5601 North 58th Court
Lincoln, NE 68507
402-466-4600
877-232-8661
Fax: 402-466-4618

2932 West Old Hwy 30
Grand Island, NE 68803
308-384-9060
800-640-7248
Fax: 308-384-7963
Call 402-344-3300 Now
700 Cunningham Drive
Sioux City, IA 51106
712-279-0666
800-608-6074
Fax: 712-279-0671
1620 4th Ave N.W. 
West Fargo. ND 58078
701-271-5070
Fax: 701-271-5075